Buck/Boost Transformer with premolded plug and receptacle. Unlike traditional transformers, you don't have to wire this one. It is designed to plug any 15 or 20 amp tanning bed in (NEMA 6-15 or 6-20) and you just plug it into your dedicated circuit (NEMA 6-20).
PLEASE NOTE: Your actually running voltage will be LESS than this measured voltage using a digital volt meter because voltage usually drops a small amount under load. We recommend that you buy a buckboost transformer with the goal of achieving 220 to 230VAC using your unloaded measurement for best performance.
This unit will lower the incoming voltage by approximately 12 volts AC.