 |
 |
|
Solid one piece steel frame is 12" longer than standard sized beds, for any sized tanner. The Power 36 is an exceptional tanning bed that offers RUVA technology and proven electronics for guaranteed performance. The Power 36 is designed to be used as either a base line system for upscale salons, or as a midline system for regular salons.
There are many tanning beds on the market in the Power 36's class, in many price ranges, but we feel the Power 36 offers distinct advantages that the serious salon owner should consider. From the ground up, the design principals were to make the system exceptionally reliable, ultimately durable and high performance. If you are tired of downtime and want a tanning bed that is built better and stronger, you must consider the Power 36.
Because of the traditional clamshell design, two persons can easily assemble this unit in about 1 to 2 hours, depending upon experience level. Professional installation is not required, since all connectors are clearly marked and the assembly is obvious. This saves you money and makes maintenance easier. All the electronics are located in a ballast tray, stored under the bed, making maintenance much easier.
While others are finding new ways to incorporate plastics in base line equipment, the Power 36 bucks the trend and stays with a solid steel design. Unlike older style "Tri-Wing" metal beds, the totally curved radius of the Power 36 makes the system much stronger. Each bed half is one continuous sheet of steel with the end caps (cold punched steel) welded to the single piece shell.
The Power 36 gives you the option of NOT having to change your base line equipment every 2 to 3 years, instead allowing you to upgrade your higher end equipment as the market dictates. This allows you to be more competitive, and costs you less in downtime, maintenance, installs and repairs. With margins getting tighter and expenses climbing higher, its a smart investment that lets you keep more of what you bring in.
Standard features include:
* 39" x 88" for the largest clients
* Solid one piece steel shell with welded end caps
* Front panel is removed with 4 thumb screws
* Ballast tray (Service Wagon) on casters under bed
* Traditional European choke electronics
* Easy to remove acrylics, uses slotted keepers instead of strips
* One Year Warranty (call for copy)
* Remote timer ready, hour meter included
* Safety "overrule" timer cuts bed OFF even if timer fails
* Redundent cooling fans keep system cool, even if some fans fail
* Extremely heavy duty frame, this is a workhorse!
* Metalic Silver powercoat with Navy Blue accents.
Power 36 (36 lamps, no facials, 20 minute session)
18 Sol Plus 100w RUVA lamps in the bench
18 Sol Plus 100w RUVA lamps in the canopy
Power requirements:
220VAC to 230VAC with a 30 amp circuit, 3 wire. Typically, a buckboost transformer is needed, but you must know your exact voltage before ordering this item. The unit does not have a power cord, and is designed to be hard wired from the ballast tray. Remote timer system is two wire, 230VAC and connects directly to the ballast tray. Will connect directly to any high voltage remote timer assembly. A T-Max remote timer is included at no extra charge. |
|
